• Tel: 0333 4330 767 0333 4330 767
  • Email: info@onlinecurtainfabrics.com info@onlinecurtainfabrics.com

Bill Beaumont Textiles Measure Guide

Measuring Guide
Download a printable instruction guide by clicking here: View guide

Pencil Pleat Heading

Curtains – All Curtains are dry clean only
Curtains will be made to the following specification:
Overlock seams, Blind stitch bottom hem, Overlock bag lined, Blind stitched sides on unlined. Overlock bag lined. 3” pocket tape as standard. Mitred spot tack corners on lined and unlined.

Measuring

Pencil Pleat curtains and valances are available to fit all curtain track and pole widths from 97cm to 470cm*. Curtains can be made to any cm drop up to a maximum of 366cm.
* Sizes based on regular width fabrics. Curtains using narrower fabric widths (120-122cm) are available to fit curtain / track widths from 82cm to 454cm.

 

Pinch Pleat Heading

Pinch Pleat are available at a surcharge, 4 pleats per width with pin hooks.

When ordering pinch pleat curtains it is important that you quote an accurate track/pole width when ordering pinch pleats. This will allow us to gather your curtains (or valance) to the correct width. Please note that the size and spacing of the pleats will vary slightly from the picture depending on your track/pole width.

Measuring

Pinch Pleat curtains are available to fit all track and pole widths from 97cm to 378cm*. Curtains can be made to any cm drop up to a maximum of 366cm.
* Sizes based on regular width fabrics. Curtains using narrower fabric widths (120-122cm) are available to fit curtain / track widths from 82cm to 336cm.

Tab Top Heading

Tab Top is a contemporary heading suitable for curtain poles with a diameter of up to 45mm (1 3/4"). Tabs are always made in the same fabric as the curtains. When ordering eyelet curtains, please tell us your pole width (measuring between the finials) and we will recommend the curtain width to give the best fit. Tab Top headings usually require fewer widths of fabric than other headings for a given pole width so can be quite a bit more economical. The difference in price for all heading options is shown when pricing a curtain.
N.B. Tab top headings are not suitable for curtain tracks, bay windows (without a special pole), or valances. Tabs measure 4” deep and are 2” wide with 8 tabs per width.

Measuring

Tab Top curtains are available to suit all curtain pole widths from 148cm to 614cm*. Curtains can be made to any cm drop up to a maximum of 366cm.
* Sizes based on regular width fabrics. Curtains using narrower fabric widths (120-122cm) are available to fit curtain / track widths from 122cm to 545cm.

Eyelet Heading

Eyelet heading is a contemporary alternative for use with curtain poles, folding curtains into large even pleats. The eyelets have an internal diameter of 40mm and are suitable for curtain poles with a diameter of up to 30mm. Eyelets are available in 4 colours.
When ordering eyelet curtains, please tell us your pole width (measuring between the finials) and we will recommend the curtain width to give the best fit.
Please note that we always show the ungathered curtain. This is the width of curtain required to allow your curtains to hang in the large, even pleats which characterise eyelet headings.
N.B. Eyelet headings are not suitable for curtain tracks, bay windows (without a special pole), or valances.

Measuring

Eyelet curtains are available to suit all curtain pole widths from 97cm to 470cm*. Curtains can be made to any cm drop up to a maximum of 366cm.
N.B. When measuring curtain drop for eyelet curtains always measure from the top of the pole to where you wish the bottom of the curtain to finish and add 3cm. It is important that the 3cm is included in the curtain drop quoted on the order form as eyelet headed curtains stand 3cm above the curtain pole.
* Sizes based on regular width fabrics. Curtains using narrower fabric widths (120-122cm) are available to fit curtain / track widths from 82cm to 454cm.

Valances & Tiebacks
A selected range of valance and tie back styles are available online. Please see below for details.

Valances
Valances are available in two styles, straight or shaped. Straight valances are 28cm (11") deep approx, shaped valances are 41cm (16") deep approx at the outer edge rising to 28cm (11") approx in the centre. Valances can be made either lined or unlined although we always recommend ordering lined valances with lined curtains.

Measuring
Pencil Pleat valances are available to fit all valance rail widths from 97cm to 470cm*.

Tiebacks
Tiebacks are available in plain or piped. All with buckram interlined and brass rings .Tie backs are made to suit curtains, We will supply the most appropriate sizes based on the size of curtains required.

Cushions
Our online range includes cushion covers in both piped and plain styles. Please see below for details.
Cushions are 43cm (17") square. Using same fabric for self piped. Both styles are sized to take a 45cm (18") pad.

Curtains

Lining
For improved drape we recommend that all curtains (and valances) are lined. We use sateen twill as standard.
All curtains (and valances / Roman blinds) are available with blackout lining. The additional price is shown when pricing your curtains. We use a 3-pass white blackout lining.
Please note that although the lining is blackout some light will still be visible around the edge of the curtain or blind. To minimise this effect, please ensure that your curtains (or blind) extend at least 10cm beyond each edge of the window.

Pattern Matching
Each pair of curtains is pattern-matched (from the bottom), although two pairs of curtains are not guaranteed to match each other. If you require two or more pairs of curtains to pattern-match each other, please visit one of our stockists.

Newsletter Signup

*

CONTACT US

Eurolink
Lea Green
St Helens
Merseyside, WA9 4QF

Phone: 0333 433 0767

Email: info@onlinecurtainfabrics.com

  • Copyright 2016 - Online Curtain Fabrics. All Rights Reserved
  • Powered by Curtasoft